2016 December Cisco Official New Released 300-370 Dumps in Lead2pass.com!
100% Free Download! 100% Pass Guaranteed!
I’m currently studying for Cisco exam 300-370. I do enjoy studying for exams. It’s hard, but it’s an excellent forcing function. I learn bits and pieces here and there now and then about this and that, but when I have an exam schedule for a set date, I have to study! And not only do I put in more hours, but I follow a more systematic approach. In this article, I’m going to share Lead2pass braindumps in case you too are studying and this method works for you.
Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-370.html
QUESTION 51
Clients are failing EAP authentication A debug shows that an EAP handshake started and the clients are then de-authenticated. Which two issues can cause this problem’? (Choose two.)
A. The clients are configured for machine authentication, but the RADIUS server is configured for user authentication.
B. The WLC has not been added to the RADIUS server as a client.
C. The WLC certificate has changed.
D. The shared secret of the WLC and RADIUS server do not match.
E. The WLAN is not configured for the correct EAP supplicant type.
Answer: BE
QUESTION 52
An engineer is creating a custom rogue classification rule directly on a controller. Which two conditions are possible when adding a custom rule to a controller? (Choose two.)
A. internal
B. ad hoc
C. client-count
D. duration
E. WLAN
F. open authentication
Answer: AD
QUESTION 53
A WLAN engineer has just completed a wireless network installation using Cisco 2700 series access points. After checking the WLC, it seems that the APs are running in medium power. What effect will this have in the APs?
A. Due to insufficient power, the access points are not broadcasting any Wireless networks.
B. Due to insufficient power, only the 2 4 GHz radio is up.
C. Due to insufficient power the access points have dynamically shifted from 3×4 to 3×3.
D. Due to insufficient power the access points have dynamically shifted from 4×4 to 3×3.
Answer: C
QUESTION 54
Refer to the exhibit. Which statement describes how the Hand Select feature works on the wireless controller?
A. The access point uses the load balancing feature to move the clients to 5 Ghz.
B. The access point changes the DTIM period on the 2 4 Ghz band.
C. The access point recommends the band in the association response to the client.
D. The access point ignores and delays the probe request of the client on the 2 4 Ghz.
Answer: C
QUESTION 55
An engineer must open a support case with Cisco TAC. Which two commands verify the model and serial number of a controller? (Choose two)
A. show sysinfo
B. show udi
C. show inventory
D. show boot
E. show tech-support
Answer: AB
QUESTION 56
A network engineer has identified clients who are experiencing delays white roaming.
The network is configured with WPA2-Enterpnse. AES encryption, 802 1X authentication, and Cisco Centralized Key Management. Which change resolves the roaming delays?
A. Utilize a supplicant that supports Cisco Centralized Key Management."
B. Enable AES and TKIP encryption
C. Disable client session timeout
D. Install wireless device drivers from Cisco
Answer: A
QUESTION 57
A recently acquired Cisco Aironet 1550 series AP is unable to join the WLC.
This message is observed on the AP console:
AAA Authentication Failure for UserName: CC93.1981.0035
User Type: WLAN USER
Which action must be taken for the AP to associate with the controller?
A. Add MAC address CC93.1981.0035 to the Security AAA AP policy Authorization List.
B. Authenticate the AP to the WLC from the console using an admin account on the WLC.
C. Add MAC address CC93.1981.035 to the Security AAA MAC Filtering tab.
D. Import the self-signed certificate of the AP to the Security:Certificate:LSC tab.
E. Import the self-signed certificate of the AP to the Security:Certificate:SSC tab.
Answer: A
QUESTION 58
An engineer is using various techniques to discover and isolate rogues on the network.
For which technique must the engineer consider legal ramifications?
A. rogue AP containment
B. RF detection
C. switch port tracing
D. wire detection
E. Cisco Prime Infrastructure location services
Answer: A
QUESTION 59
Refer to the exhibit. The AP is unable to join the controller. What is the cause of this error?
A. The controller code version is lower than the code of the AP attempting to join.
B. AP code is not the same as the controller and must download firmware.
C. AP model \% not compatible with the controller code version.
D. The AP is riot conjured in the controller auth-list of acceptable APs.
Answer: C
QUESTION 60
Refer to the exhibit. A VoWLAN has been deployed at a customer site. and users report that audio is choppy in some areas The exhibit captures a voice exchange between one phone that is associated to the AP at the end of the corridor (172.31 255 101) and another phone that is positioned in a conference room nearby.
Which action enhances the voice application quality of experience?
A. Change the basic rate configuration on the WLC to include 54 Mbps.
B. Change the WLAN QoS profile to platinum.
C. Decrease the AP power level.
D. Disable higher data rates on the controller.
Answer: A
If you want to prepare for 300-370 exam in shortest time, with minimum effort but for most effective result, you can use Lead2pass 300-370 dump which simulates the actual testing environment and allows you to focus on various sections of 300-370 exam. Best of luck!
300-370 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDeXZTcXZnWk5naVU
2016 Cisco 300-370 exam dumps (All 70 Q&As) from Lead2pass:
http://www.lead2pass.com/300-370.html [100% Exam Pass Guaranteed]